Product News
January 29, 2020 | Product News
Neal Systems Engineer Peter Jackson has created a simple but effective solution using a Red Lion Cellular Data Modem. In this application note, Peter demonstrates a simple, but powerful feature of the event engine and how to control the level of water in a fish tank.
The same principle can be used for a municipal tank level, flow, pressure, temperature, or to a stirrer.
Find the application note here: Event Engine and Water Level
November 21, 2019 | Product News
The Foxboro Telemetry & Remote SCADA Systems (TRSS) is a logic control and data acquisition system built around the unique features and benefits of the following products: EcoStruxure GeoSCADA Expert Process Visualization Software (formerly known as ClearSCADA), Foxboro ScadaPACK Remote Terminal Units (RTUs), Accutech Wireless Instrumentation, Trio Data Radios.
Schneider Electric Foxboro TRSS can be configured and set-up via programs using menu-driven, table-driven, and point-and-click developer interfaces. Also, TRSS is optimized to be a data exchange method that fully embraces the advantages, robustness, and efficiency of the DNP3 protocol.
Neal System’s team of expert engineers can work with you to build the best system for your specific application using the Telemetry & Remote SCADA Systems (TRSS) products.
Want to learn more about the individual products or TRSS as a whole? Contact one of our application engineers here!
November 12, 2019 | Product News
Surge protectors usually are triggered and reset when there is a potentially damaging electrical surge in signal cables. Only when the surge goes above 20kA or more do these devices fail, which is what can be seen in the photos below.
When these types of surges occur, without protection, the entire panel would likely be destroyed. Instead, a small economical device takes the hit, breaks the circuit and the entire panel is protected.
The photo shows a melted and exploded-looking MTL SD32MDX. The energy this device was able to take and divert saved the connected sensitive electrical equipment from destruction.
For around $100 a piece you can potentially save thousands in repairs and replacements with a simple installation of a surge protection unit.
November 7, 2019 | Product News
Learn how to configure a Draeger PointGard 2100 by clicking the image below!
February 11, 2019 | Product News
The RTT15S Temperature Transmitter is a microprocessor based temperature transmitter that uses HART communication protocol. In addition to thermocouples and 2, 3, or 4 wire RTDs, the unit can take in ohm and millivolt signals. The RTT15S is in an explosion=proof housing with optional display and optical buttons for local configuration. This unit is also available as a basic module that can be surface or DIN rail mounted. Basic configurations on the RTT15S is a snap! Take a look at our newest video HERE highlighting Schneider Electric’s Foxboro RTT15S Temperature Transmitter.
